Resource

LS-DYNA vs. DYNA3D — Benchmark and Validation Testing

Resource Type
Reports
Reference Title
LS-DYNA vs. DYNA3D — Benchmark and Validation Testing
Author/Presenter
O’Shea, Kevin M.
Organization/Agency
U.S. Department of Interior
U.S. Bureau of Reclamation
Year
2006
Date
December 2006
Document Number
DSO-06-02
Abstract/Additional Information

This report summarizes the basic results comparing program performance and stability between DYNA3D and LS-DYNA as well as the validation and benchmark testing of LS-DYNA. The finite element models (FEM) for Parker Dam and Black Canyon Diversion Dam were selected to be used as the test cases in comparing DYNA3D and LS-DYNA due to their size and contact surface complexity. The load application in this model is as follows: (1) Gravity and forces are applied from 0 to 3 seconds. (2) The model stabilizes from 3 to 6 seconds. (3) The ground motion begins at 6 seconds and runs until 20 seconds. Both DYNA3D and LS-DYNA are highly complex programs that produce valuable results for structural analysis issues. Several problem areas have been examined and compared using both codes.

URL(s)
https://www.usbr.gov/ssle/damsafety/TechDev/DSOTechDev/DSO-06-02.pdf